When automatic composite data messaging is selected, the transmitter sends composite data messages at user-configurable intervals. The message structure is the same as with the composite data query command aR0 and contains a user-configurable set of wind, pressure, temperature, humidity, precipitation, and supervisor data.
Example of the response (you can select the parameters included from the full parameter set of the commands aR1, aR2, aR3, and aR5):
0R0,Dx=005D,Sx=2.8M,Ta=23.0C,Ua=30.0P,Pa=1028.2H,
Hd=0.00M,Rd=10s,Th=23.6C<cr><lf>For selecting the parameter set in the response message, see Sensor and data message settings.
Automatic composite data messaging is a concurrent, not an alternate mode to either the polled or automatic modes.