Connecting through M12 bottom connector or screw terminal - WXT530

WXT530 Series User Guide

Document code
M211840EN
Revision
F
Language
English (United States)
Product
WXT530
Document type
User guide

You can check and change the device settings through the 8-pin M12 bottom connector or screw terminal.

To do this, you must know the device communication settings, have a suitable cable between the device and the host, and, if needed, use a converter (for example, RS-485/422 to RS-232, if the host is a PC). The following table shows the factory default settings:

Table 1. Default serial communication settings for M12/screw terminal connection
Serial interface Serial settings
SDI-12 1200 baud, 7, E, 1
RS-232 ASCII 19200 baud, 8, N, 1
RS-485 ASCII 19200 baud, 8, N, 1
RS-485 Modbus RTU 19200 baud, 8, E, 1
RS-422 ASCII 19200 baud, 8, N, 1
RS-422 NMEA 4800 baud, 8, N, 1