Grounding with bushing and grounding kit - WXT530

WXT530 Series User Guide

Document code
M211840EN
Revision
F
Language
English (United States)
Product
WXT530
Document type
User guide

If the surface of the mounting point is painted or has some other finishing that prevents a good electrical connection, consider using the bushing and grounding kit (222109) and a cable to ensure ground connection.

Use the bushing and grounding kit to run a cable from the fixing screw to a grounding point. The kit does not include a grounding cable. The minimum grounding conductor size is 4 mm2 (AWG 11).

  1. Assemble the grounding kit so that the connector for the grounding cable is between the washers and nuts.
    1
    Connector for grounding cable
    2
    Abiko connector
    3
    Washer (2 pcs)
    4
    Nut (2 pcs)
    5
    Fixing screw
  2. Connect a grounding cable to the connector. Use a 16 mm2 conductor to achieve a good ground connection.
  3. Remove the transmitter fixing screw.
  4. Insert the grounding kit through the hole in the seal. Make sure the nuts are tight so that the connector has a good connection.
    1
    Seal
    2
    Fixing screw
  5. Connect the other end of the cable to a good grounding point.