Checking the settings (aWU) - WXT530

WXT530 Series User Guide

Document code
M211840EN
Revision
F
Language
English (United States)
Product
WXT530
Document type
User guide

With the following command you can check the current wind sensor settings.

Command format in ASCII and NMEA 0183:

aWU<cr><lf>

Command format in SDI-12:

aXWU!
a Device address
WU Wind sensor settings command in ASCII and NMEA 0183
XWU Wind sensor settings command in SDI-12
<cr><lf> Command terminator in ASCII and NMEA 0183
! Command terminator in SDI-12

The response in ASCII and NMEA 0183:

aWU,R=[R],I=[I],A=[A],G=[G],U=[U],D=[D],N=[N],F=[F]<cr><lf>

The response in SDI-12:

aXWU,R=[R],I=[I],A=[A],G=[G],U=[U],D=[D],N=[N],F=[F]<cr><lf>

where [R][I][A][G][U][D][N] are the setting fields.

Example (ASCII and NMEA 0183, device address 0):

0WU<cr><lf>

0WU,R=01001000&00100100,I=60,A=10,G=1,U=N,D= -90,N=W,F=4<cr><lf>

Example (SDI-12, device address 0):

0XWU!0XWU,R=11111100&01001000,I=10,A=3,G=1,U=M,D=0,N=W,F=4<cr><lf>