Installing foundation bolts - DKP711SET - DKP721SET

DKP721SET and DKP711SET Installation Manual
Document code
M211835EN
Revision
C
Language
English
Product
DKP711SET
DKP721SET
Document type
User guide
  • Adhesive tape
  • Brush and compressed air or air pump
  • Chemical anchor such as injectable adhesive anchor
  • Drill hammer
  • Hammer
  • Measuring tape
  • Spirit level
Wear protective eyewear, gloves, and a safety helmet.

To install the bolts, you need:

  • Foundation bolt (3 pcs)
  • Wedge bolt (3 pcs)
  • Bar for installing the wedge bolts (1 pc)
  • Key piece for the wedge bolts (1 pc)
  1. Check the correct position of the foundation bolt holes.
    1. On the mast foundation, make sure that 80 mm (3.15 in) of the foundation bolts is above the surface of the concrete foundation.
    2. Use a spirit level to check the vertical position of the foundation bolts.
  2. Make sure that the holes are free of dust, and clean and dry.
  3. Check the instructions of the chemical anchor manufacturer before use.
    The chemical anchor may harden very fast. Work in a coordinated manner and follow the instructions and the given working times.
  4. Check that the foundation bolts are at the correct height, vertical, and on the same level with each other.
  5. Check the instructions of the chemical anchor manufacturer for the time it takes for the chemical anchor to set. Leave the chemical anchor to set.