Overview of AP10 Access Point - AP10E - AP10A - AP10J - AP10T

AP10 Quick Guide

Document code
M211821EN
Revision
F
Language
English (United States)
Product
AP10E
AP10A
AP10J
AP10T
Document type
User guide

Vaisala VaiNet Access Point AP10 is a wireless access point that collects data from VaiNet wireless data loggers and transfers it to the viewLinc Enterprise Server using a wired Ethernet connection. AP10 implements Vaisala's proprietary VaiNet protocol. It can connect up to 32 RFL100 Data Loggers to the Vaisala viewLinc Monitoring System. The wireless connection operates on 868 MHz, 915 MHz, or 920 MHz frequency band depending on the model. For more information on viewLinc system installation, see the viewLinc Setup Guide and viewLinc User Guide for your viewLinc Enterprise Server version.

Figure 1. AP10 in the viewLinc Monitoring System

AP10 can be powered from the Ethernet connector using Power over Ethernet (PoE) or from the power supply connector using the included AC/DC adapter. If both power sources are connected, the AC/DC adapter is utilized to power the device.

AP10 has two user interfaces:

  • Touch interface on the front panel. Use this interface to set up the device during installation and to locally check the connection status.
  • Web interface via the Ethernet connection. This interface provides advanced configuration features and can be accessed remotely.