Overview of calibration with Indigo200 using Insight - GMP251

GMP251 User Guide

Document code
M211799EN
Revision
H
Language
English
Product
GMP251
Document type
User guide
Figure 1. Insight calibration menu main view (CO2 probe)

The calibration menu in the Insight PC software contains options for calibrating and adjusting the measurement of the probe you have connected to the transmitter, and testing and adjusting the analog output channels of the transmitter. You can also view the current adjustment and restore the probe's factory adjustments.

The range of available options (for example, environmental compensations and the number of adjustment points) varies depending on the features of the connected probe.

The menu examples presented here are examples of calibration options that are available when a CO2 probe is connected to the transmitter.

CAUTION Before adjusting a probe's measurement, make sure that you have familiarized yourself with the probe-specific calibration requirements such as possible adjustment limits and environmental compensation interdependencies. See the user documentation of the probe for probe-specific information.

Starting calibration

To open the calibration menu, select to access Insight main menu. In the main menu, select Calibrate.
Figure 2. Insight Calibrate menu selection

Restoring factory adjustment

Before adjusting the probe measurement, you can remove any possible earlier adjustments with the Restore factory adjustment selection, if needed.

Figure 3. Insight Restore factory adjustment selection