Installing winch to erected mast - DKE110F

DKE110F User Guide

Document code
M211788EN
Revision
E
Language
English (United States)
Product
DKE110F
Document type
User guide
  • 10‑mm wrench
  • 24‑mm wrench (2 pcs)
WARNING Before disconnecting the guy wire, check that the winch is installed securely and that the winch wire is tight.
  1. Assemble the lifting rod by screwing the single parts to the joined parts.
  2. Attach the lifting rod to the mast base plate.
    1
    Hex screw (2 pcs)
    2
    Hex nut (2 pcs)
  3. Disconnect the guy wire that is closest to the lifting rod from the guy rod.
  4. Lift up the lifting rod and attach it with a shackle to the guy rod.
    1
    Guy rod
    2
    Shackle
    3
    Lifting rod
  5. Attach the winch hook to the end of the lifting rod.
    1
    Guy rod
    2
    Lifting rod
    3
    Winch hook
  6. Disconnect the guy wire from the foundation.

    If you use additional middle guy wires, disconnect also the additional guy wire from the foundation.

  7. Remove the locking pin from the winch and install the winch to the lifting eye bolt on the guy wire foundation.
    1
    Winch
    2
    Locking pin
  8. Secure the winch with the locking pin.