Installing DKL202 air terminal - DKL201 - DKL202

DKL201 and DKL202 Installation Guide
Document code
M211785EN
Revision
D
Language
English
Product
DKL201
DKL202
Document type
User guide
Figure 1. DKL202 kit for wooden mast
1
Hex screw M6×35 DIN912 A4 (6 pcs)
2
Air terminal bracket (DRW241413) (2 pcs)
3
Universal wood screw 5 × 60 pan head Torx A2 (6 pcs)
4
Flat washer A6 4 DIN125 A4 (12 pcs)
5
Spring washer B6 DIN127 A4 (6 pcs)
6
Hex nut M6 DIN934 A4 (6 pcs)
  1. Put the air terminal between the brackets.
  2. Attach the air terminal to the brackets.
  3. Place the air terminal assembly to the mast so that it is horizontally as far as possible from the other equipment installed on the mast.
    CAUTION To prevent equipment damage, install the air terminal so that its tip is as high above the sensors as possible.
    CAUTION Position the air terminal bracket so that the mast down conductor and the other cables can be routed down on the opposite sides of the mast.
  4. Fasten the air terminal assembly to the mast by tightening a screw to the center of the bracket.
  5. Move the assembly slightly down.
  6. Install the remaining 4 screws in the brackets and tighten them carefully.