Installing DKL202 parallel groove connector - DKL201 - DKL202

DKL201 and DKL202 Installation Guide
Document code
M211785EN
Revision
D
Language
English
Product
DKL201
DKL202
Document type
User guide
To prevent corrosion, oxidation, and seizing, use a non‑conductive, non‑water‑soluble, non‑silicone‑based grease, such as ceramic or Teflon paste, between different kinds of metal.
  1. Strip 40 mm (1.57 in) of the cable jacket from the end of the down conductor.
  2. Place the groove connector around the lower end of the air terminal. Tighten by hand.
    1
    Groove connector
    2
    Split pin
    3
    Air terminal
    4
    Down conductor
  3. Place the down conductor in the groove connector. Tighten the 2 bolts.
  4. Insert the split pin.