Detaching the unwinder stick - RS41-SGM

RS41-SGM User Guide
Document code
M211752EN
Revision
F
Language
English
Product
RS41-SGM
Document type
User guide

To start using the RS41 unwinder, you must first detach the unwinder stick from the unwinder body.

  1. The unwinder stick (number 1 in the following figure) is attached between two plastic clips in the unwinder hook (number 2). Detach the stick from between the plastic clips and pull it out from the unwinder bottom plate (3).
    If the unwinder stick is tightly attached to the bottom plate, it is a good idea to slightly twist the unwinder stick before pulling it out.
  2. When you pull the unwinder stick out, make sure that the string unwinds and that it is not tangled.
    Figure 1. RS41 unwinder details
    1
    Unwinder stick
    2
    Unwinder hook
    3
    Unwinder bottom plate
    4
    Unwinder clip