Connecting RG13(H) - RG13 - RG13H

RG13 and RG13H User guide
Document code
M211724EN
Revision
E
Language
English
Product
RG13
RG13H
Document type
User guide
  1. Loosen the 2 locks that secure the outer tube to the base and lift off the outer tube.
  2. Connect the output signal cable through the grommet and into the terminal block located on the base. Seal it with a silicone rubber compound.
    Figure 1. Wiring RG13
    1
    Gray wire
    2
    Green wire
    4
    Grommet
    Figure 2. Wiring RG13H
    1
    Connector block for the heater
    2
    Connector block for the signal cable
    3
    Thermostat switch
    Figure 3. Wiring diagram for standalone RG13H
    Figure 4. Wiring diagram for AWS-integrated RG13H