Mounting display on display stand - WID513

WID513 User Guide

Document code
M211676EN
Revision
G
Language
English
Product
WID513
Document type
User guide
Figure 1. Display installed with display stand (showing also panel mounting brackets/screws)
1
Panel mounting bracket
2
Knurled thumb screw for the display stand
3
Protective film to be removed after installation
4
Screws for moving the panel mounting brackets (behind the front cover)
5
Mounting holes for inserting the mounting screws for the stand

After connecting cables and reattaching the connectors:

  1. Reattach the back cover and tighten the screws that hold the cover.
  2. Reattach the front cover and tighten the fixing screws for the cover.
  3. Insert the mounting screws into the mounting holes at the bottom of the stand, adjust the stand to the required position, and tighten the screws.
  4. Attach the stand to the display with the two knurled thumb screws located on both sides of the display.
  5. Once you have found the desired positioning, tighten both thumb screws.
  6. Remove the protective film before taking the display into use.
The display is now mounted on the display stand.