Button | Description |
---|---|
Network | Displays network information for the display (for example, the IP address). |
Configurations | Allows you to export the existing display configuration to a USB Flash memory stick and to import a new configuration from a USB Flash memory stick to the display. |
SW Update |
Displays the current software version. For Vaisala use only: Allows upgrading to a newer software version to the display using USB Flash memory. |
Page selection |
Opens the page for selecting which of the available data pages are displayed. |
Messages |
Opens the page for selecting which messages are in use. Enables also configuring the message settings and the settings of the respective sensor. |
COM | Opens the page for configuring the communication settings or viewing the data flow when serial line connection is used for receiving sensor data. |
NET | Opens the page for configuring the communication settings or viewing the data flow when Ethernet connection is used for receiving sensor data. |
Station | Opens the page for configuring the station settings. |
Pressure | Opens the page for configuring the pressure settings. |
Time settings | Opens the page for setting the time manually or using Network Time Protocol (NTP) server address. |
Runway | Opens the page for configuring the runway settings for pressure calculation. |
Back |
On the Advanced settings page: Logs you out from advanced settings. On other pages, returns to the previous page without saving changes ( = cancel). |
Home | Logs you out from advanced settings and returns to Observation mode. |
After making changes on the settings pages, always press Apply to save the changes. |