| 5‑mm Allen key |
Install the camera on a support arm. For the best images:
- Install the camera high enough to avoid spray from passing vehicles.
- Avoid obstacles in the field of view of the camera.
- Point the camera away from powerful light sources.
- Avoid blocking any other sensors with the camera.
- 1
- Mounting frame
- 2
- Flat washer A6.4 DIN125 A4 (4 pcs)
- 3
- Hex screw M6×25 DIN912 A4 (4 pcs)
- 4
- Clamp plate
- 5
- Hex screw M6×60 DIN912 A4 (4 pcs)
- 6
- Spring washer A6 DIN127 A4 (4 pcs)
| To prevent corrosion, oxidation, and seizing, use a non‑conductive, non‑water‑soluble, non‑silicone‑based grease, such as ceramic or Teflon paste, between different kinds of metal. |
-
Connect the camera Ethernet cable to the RJ45 connector coupler and attach the camera
to the mounting frame. Tightening torque 4 Nm.
- 1
- RJ45 connector coupler
- 2
- Mounting frame
- 3
- Flat washer A6.4 DIN125 A4 (4 pcs)
- 4
- Hex screw M6×25 DIN912 A4 (4 pcs)
-
Attach the mounting frame to the support arm. Tightening torque 5 Nm.
- 1
- Clamp plate
- 2
- Hex screw M6×60 DIN912 A4 (4 pcs)
- 3
- Spring washer A6 DIN127 A4 (4 pcs)