These instructions apply to 12 V / 24 to
28 Ah batteries. The battery is delivered in a separate package.
WARNING Do not connect the
battery until the system is ready for powering up.
WARNING Do not leave the
battery in an environment surrounded by extremely high temperatures. Extremely high
temperature can result in deflagration or leakage of flammable liquid or gas.
WARNING Make sure that the
battery is not subjected to an extremely low air pressure. Extremely low air
pressure can result in deflagration or leakage of flammable liquid or gas.
WARNING Make sure that the
battery is installed in a weather-proof and ventilated enclosure.
Remove the battery mounting clamp from the battery holder.
Unpack the battery.
Remove the protective covers and connectors from the battery cables.
1
Battery cable
2
Protective cover
3
Connector
Attach the connectors to the battery terminals. Make sure that the connectors point to
each other.
1
Screw (2 pcs)
2
Spring washer (2 pcs)
3
Flat washer (2 pcs)
4
Connector (2 pcs)
Fasten the screws tightly.
If the screws are loose, the battery
will not charge, so it will not provide power to the weather station.
Lift the battery to its place and attach the battery clamp.
Remove the cable tie that holds the battery cables together.
Insert the red battery cable into the connector in the positive
( + ) terminal in the battery.
Insert the black battery cable into the connector in the negative
( ˗ ) terminal in the battery.
