|
| WARNING Make sure that you prepare or connect only de-energized wires. |
| CAUTION Do not damage or change the wiring. Incorrect wiring can cause damage and prevent or limit operation. |
- 1
- Ferruled wires
- 2
- Connector
- 3
- Quick reference card
Push the ferruled wires to the correct pins in the connector.
Use either of the following methods:
-
Leave the connector in the PMU701 or DRI701.
-
Insert the connector in the quick reference card for the sensor.
To make sure that the connector pins match the numbers in the card, insert the connector as shown in the previous picture.
With smaller wires (< 0.5 mm2), use pliers.