The DTS210 Type IIA cable is fixed to the sensor. The cable can be lengthened by splicing it with a Type V extension cable.
If you have two DTS210 sensors, mirror the connections on the left side of the connector.
| Cable code | Cable length | Number of wires | DRI701 slot |
|---|---|---|---|
| Fixed cable | – | 8 + shield 1 |
SENSOR (first sensor on the right) (second sensor on the left) |
|
Signal Sensor 2 |
Wire color Sensor 2 |
DRI701 connector pin |
Wire color Sensor 1 |
Signal Sensor 1 |
|
|---|---|---|---|---|---|
| Thermistor − | Gray/White | 8 | 4 | Gray/White | Thermistor − |
| Thermistor + | White | 7 | 3 | White | Thermistor + |
| Not connected | – | 6 | 2 | – | Not connected |
| Not connected | – | 5 | 1 | – | Not connected |
| Color | Usage | Action |
|---|---|---|
| Shield | Ground |
Connect to enclosure sensor grounding rail. |
| Black | Not used | Cut. |
| Red | ||
| Orange | ||
| Brown | ||
| Blue | ||
| Green |
1 Calculated after cutting the cable.