DTS210 spliced cable wiring - RWS200

RWS200 Installation Manual

Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide

The DTS210 Type V is an extension cable for the fixed Type II cable. If you have two DTS210 sensors, mirror the connections on the left side of the connector.

DTS210 Type V cable
Extension cable maximum length Number of wires DRI701 slot
1524 m (5000 ft) 1 6 twisted pairs + shield 2

SENSOR

(first sensor on the right)

(second sensor on the left)

DTS210 type V cable termination to 8-pin connector

Signal

Sensor 2

Wire color

Sensor 2

DRI701 connector pin

Wire color

Sensor 1

Signal

Sensor 1

Thermistor − White (paired with gray) 8 4 White (paired with gray) Thermistor −
Thermistor + Gray 7 3 Gray Thermistor +
Not connected 6 2 Not connected
Not connected 5 1 Not connected
DTS210 Type V cable shield and unused wires
Color Usage Action
Shield Ground

Connect to enclosure sensor grounding rail.

White (paired with green) Not used

Cut to different lengths and insulate with electrical tape.

Green
White (paired with brown)
Brown
White (paired with orange)
Orange
White (paired with blue)
Blue
Blue (paired with red)
Red
DTS210 Type V wiring
1 Manufacturer: General Cable, cable type: filled solid cable RDUP (RUS) PE-39 AL, 6 pairs (AWG-19)
2 Calculated after cutting the cable.