WA15 consists of anemometer WAA151, wind vane
WAV151, and serial wind transmitter WAC155.
For the most reliable measurements:
Avoid trees or other objects nearby which
could disturb wind flow.
Install the sensor to the height that best
represents the prevailing wind conditions on site.
Vaisala serial wind transmitter
WAC155
1
Flange for mounting Vaisala anemometer
2
Flange for mounting Vaisala wind vane
3
Transmitter, contains the component board
4
Sensor cable gland
5
Cross arm
WARNING Do not perform
installation or maintenance procedures when there is a risk of thunderstorm or
lightning activity in the area.
CAUTION To prevent equipment damage, install an air terminal so that the tip is as high above the instruments and sensors as possible.
To prevent corrosion,
oxidation, and seizing, use a non‑conductive, non‑water‑soluble, non‑silicone‑based
grease, such as ceramic or Teflon paste, between different kinds of metal.