Mounting wind sensors on cross-arm - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
  • 2-mm Allen key
  • Compass
  1. Fit the cable plug through the mounting flange at the end of the cross-arm, and connect the cable to the sensor.
    1
    Plastic washer
    2
    Hex screw
  2. Insert the plastic washers between the flange and the sensor.
  3. Face the sensor product label South, if possible, and mount the sensor to the flange by twisting.
  4. Tighten the screws.
  5. Mount the assembly and tighten the fixing screw.