Mounting wind set on support arm - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
5‑mm Allen key
  1. Install the SENSORARMFIX60 mounting bracket on the support arm. Tightening torque 5 Nm.
    1
    Ø 60 mm (2.36 in) bracket
    2
    Sensor bar fixture part
    3
    Hex screw M6×60 DIN912 A4 (2 pcs)
    4
    Spring washer A6 DIN127 A4 (2 pcs)
  2. Lead the sensor cable through the mounting bracket.
  3. Insert the cross arm on the mounting bracket and tighten the installation bolt. Tightening torque 5 Nm.
  4. Align the wind set.