Mounting AQT560 on support arm - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
  • 5‑mm Allen key
  • 10‑mm wrench
  1. Attach the mounting bracket to the support arm. Tightening torque 5 Nm.
    1
    Mounting bracket (ASM214287)
    2
    Attachment set (ASM214346)
    3
    Flat washer A6,4 DIN125 A4 (4 pcs)
    4
    Hex screw M6×80 DIN912 A4 (4 pcs)
  2. Attach AQT560 to the mounting bracket. Tightening torque 3 Nm.

    Use the Allen key and wrench to tighten the screw and the nut to the mounting bracket.

  3. Connect the sensor cable.
Write down the sensor installation height. This is needed for the metadata in the Web UI.