Install R.M. Young Wind Monitor on a support
arm or on top of a 60‑mm (2.36‑in) pole mast. For the most reliable measurements:
Avoid trees or other objects nearby which
could disturb wind flow.
Install the sensor to the height that best
represents the prevailing wind conditions on site.
CAUTION To prevent equipment damage, install an air terminal so that the tip is as high above the instruments and sensors as possible.
R.M. Young Wind Monitor installation
accessories
1
Band clamp
2
Orientation ring
3
Mounting bracket (RMYFIX60)
3.1
Mounting adapter
3.2
Hose clamp
3.3
Hex screw M6×55 DIN912 A4
4
Mounting kit (SENSORARMFIX60)
4.1
Ø 60 mm (2.36 in) mounting bracket
4.2
Sensor bar fixture part
4.3
Hex screw M6×60 DIN912 A4 (2 pcs)
4.4
Spring washer A6 DIN127 A4 (2 pcs)
To prevent corrosion,
oxidation, and seizing, use a non‑conductive, non‑water‑soluble, non‑silicone‑based
grease, such as ceramic or Teflon paste, between different kinds of metal.