Mounting R.M. Young Wind Monitor on mounting bracket - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
  1. Connect the sensor cable to the junction box.
  2. Reattach the junction box cover.
  3. Attach the propeller to the sensor so that the serial number on the propeller faces away from the sensor shaft.
  4. Tighten the propeller nut by hand.
  5. Check that both the propeller and the vane easily rotate 360° without friction.
  6. Insert the orientation ring on the mounting bracket.
    1
    Orientation ring
    2
    Mounting bracket (RMYFIX60)
  7. Place the sensor on the mounting bracket and tighten the band clamp.