Mounting multiband antenna on support arm - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
5‑mm Allen key
  1. Attach the mounting bracket loosely to the clamp plate. Tightening torque 5 Nm.
    Pay attention to the mounting position, because the clamp plate has wings.
    Antenna mounting kit (ASM211224)
    1
    Mounting bracket
    2
    Clamp plate
    3
    Flat washer A6.4 DIN125 A4 (4 pcs)
    4
    Spring washer B6 DIN127 A4 (4 pcs)
    5
    Hex screw M6×60 DIN912 A4 (4 pcs)
  2. Slide the mounting bracket on the support arm, and tighten the screws.
  3. Loosen the fastening nut at the bottom of the antenna.
  4. Slide the antenna on the mounting bracket.
  5. Tighten the nut.