Mounting multiband antenna on enclosure - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
5‑mm Allen key
Antenna installed on the enclosure radiation shield
Antenna mounting kit (ASM211224)
1
Mounting bracket
2
Clamp plate
3
Flat washer A6.4 DIN125 A4 (4 pcs)
4
Spring washer B6 DIN127 A4 (4 pcs)
5
Hex screw M6×60 DIN912 A4 (4 pcs)
  1. Drill installation holes to the radiation shield according to the following dimensions.
  2. Attach the mounting bracket to the radiation shield. Tightening torque 5 Nm.
    1
    Mounting bracket
    2
    Hex screw M6×16 ISO7380 A4 (4 pcs)
    3
    Flat washer A6.4 DIN127 A4 (4 pcs)
  3. Loosen the fastening nut at the bottom of the antenna.
  4. Slide the antenna on the mounting bracket.
  5. Tighten the nut.