Attaching pressure port to ENC722 - RWS200

RWS200 Installation Manual
Product status
Document code
M211608EN
Revision
AA
ft:locale
en-US
Product
RWS200
Document type
User guide
  • Screwdriver
  • 5‑mm Allen key
  1. Assemble the pressure port according to the instructions in the pressure port bag.
  2. Insert the pressure port through the hole at the bottom of the enclosure.
    1
    Pressure hose
    2
    Pressure port
  3. Attach the pressure port to the enclosure with the hex nut.
  4. Insert the pressure hose onto the pressure port nozzle.
    CAUTION To avoid damaging the hose, do not use tools.