You can connect the following existing sensors to the station without any configuration in advance:
- DRD11A (requires PMA701CB version C or newer)
- DRS511
- DTS12G
- DTS210
- FP2000
- RG13H (requires RWS200 software version 2.3 or newer)
- R.M. Young Wind Monitor
- SP Lite2 (requires RWS200 software version 2.3 or newer and DRI701 software version 1.2.9 or newer)
- TPS10 (requires RWS200 software version 2.3 or newer)
- WA15
The following existing sensors and devices need configuring and possibly a software upgrade before you can connect them to the station:
- AQT530 (requires RWS200 software version 4.4.0 or newer)
- AQT560 (requires RWS200 software version 4.4.0 or newer)
- DSC111
- DST111
- Mobotix fixed camera
- PWD12 and PWD22
- WMT700
- IX20 cellular router
- WXT520
For instructions, see RWS200 Retrofit Guide (M211763EN).
For instructions on retrofitting AXIS PTZ camera, see RWS200 PTZ Camera Setup Guide (M211824EN).
When you retrofit a sensor, add a retrofit label from accessory bag DRW242777 to the sensor.
To retrofit HMP155E for RWS200, send the sensor to Vaisala.