Example: Set compensation temperature - GMP231

Table 1. Set compensation temperature sequence example

Message Bytes (hex)	Sent by	Content
	Master	I2C start condition
12		I2C address (write)
82		Set_parameter command
09		Device address
0A		Frame length
10		Parameter ID of compensation temperature
00		Temperature 37 °C
00
14
42
0C		CRC high
6E		CRC lo
		I2C repeated start condition
13		I2C address (read)
04	GMP231	Status byte (error active, ACK)
82		Set_parameter command
09		Device address
08		Frame length
10		Parameter ID of compensation temperature
00		Return code: Ok
D1		CRC high
CE		CRC lo
	Master	I2C end condition