Device information and status - GMP231

GMP231 User Guide

Document code: M211501EN
Revision: E
Language: English
Product: GMP231
Document type: User guide

Table 1. ? Command
Syntax	Description
?<cr>	Show listing of device information.
??<cr>	Show listing of device information even if the device is in POLL mode but its address is unknown. Do not use the ?? command if you have more than one device on an RS-485 line.
Example: `? Device : GMP231 Copyright : Copyright (c) Vaisala Oyj 2013. All rights reserved. SW Name : GMP231 SW version : 1.0.1.1537 Snum : J1320082 Calibrated : 2014-03-11 Address : 1 Smode : STOP`

Table 2. SNUM command
Syntax	Description
SNUM<cr>	Show serial number of the probe.
Example: `snum Serial number : J1320082`

Table 3. VERS command
Syntax	Description
VERS	Show firmware version of the probe.
Example: `vers GMP231 / 1.1.0.1537`

Table 4. SYSTEM command
Syntax	Description
SYSTEM<cr>	Show probe firmware information.
Example: `system Device Name : GMP231 SW Name : GMP231 SW version : 1.1.0.1537`

Table 5. TIME command
Syntax	Description
TIME	Show how long the probe has been in operation since the last startup or reset. The operation counter is in format hh:mm:ss. Full days and hours are retained in the counter, minutes and seconds are cleared at reset.
Example: `time 00000:23:56:49 Up time: 3409 s` Cumulative uptime is 23 hours, 56 minutes, and 49 seconds, uptime since last reset is 3409 seconds.

Table 6. HELP command
Syntax	Description
HELP<cr>	Show list of the currently available serial commands.
Example (shows basic commands, advanced commands are not enabled): `CLOSE ECHO ENV ERRS FORM HELP INTV PASS R RESET S SDELAY SEND SERI SMODE SNUM STANDBY SYSTEM TIME VERS`