Connecting GMP231 to MI70 Indicator - GMP231 - MI70

GMP231 User Guide

Document code
M211501EN
Revision
E
Language
English (United States)
Product
GMP231
Document type
User guide
  1. If GMP231 is installed in an incubator, disconnect the incubator’s cable from the 8-pin M12 connector. Note that GMP231 can remain physically connected to the incubator.
  2. If the MI70 indicator is on, turn it off.
  3. Connect GMP231 to the MI70 indicator using the GMP231 service cable for MI70.
  4. Turn on the MI70 indicator. MI70 detects the probe and proceeds to show the measurement screen. The parameters measured by GMP231 start to show valid measurement results after a few seconds.