Property | Description/Value |
---|---|
Measurement range | 0 … 20 %CO2 |
Calibration uncertainty at 5 %CO2 | ±0.1 %CO2 |
Start-up time | < 20 s |
Warm-up time for full spec. | < 3 min |
Response time | |
T63 | < 30 s |
T90 | < 50 s |
Accuracy at 37 °C, 1013 hPa | |
Repeatability at: | |
0 … 8 %CO2 | ±0.1 %CO2 |
8 … 12 %CO2 | ±0.2 %CO2 |
12 … 20 %CO2 | ±0.4 %CO2 |
Non-linearity at 0 … 20 %CO2 | ±0.1 %CO2 |
Temperature dependence | |
With compensation at 3 … 12 %CO2, 20 … 60 °C | ±0.1 %CO2 |
Without compensation (typical) | -0.4 % of reading/°C |
Pressure dependence | |
With compensation at 3 … 12 %CO2, 700 … 1100 hPa | ±0.015 % of reading/hPa |
Without compensation (typical) | +0.15 % of reading/hPa |
Humidity dependence | |
With compensation at 0 … 20 %CO2, 0 … 100 %RH | ±0.9 % of reading (at 37 °C) |
Without compensation (typical) | +0.05 % of reading/%RH |
O2 dependence | |
With compensation at 0 … 20 %CO2, 0 … 90 %O2 | ±0.6 % of reading |
Without compensation (typical) | -0.08 % of reading/%O2 |
Long-term stability | |
0 … 8 %CO2 | < ±0.2 %CO2/year |
8 % … 12 %CO2 | < ±0.5 %CO2/year |
12 % … 20 %CO2 | < ±1.0 %CO2/year |
Property | Description/Value |
---|---|
Operating temperature for CO2 measurement | 0 … +70 °C (+32 … +158 °F) |
Max. temperature durability in standby mode (sensor head only) | Max. +195 °C (+383 °F) |
Heat sterilization 180 °C durability | At least 120 cycles |
Storage temperature | -40 … +75 °C (-40 … +167 °F) |
Pressure (compensated) | 500 … 1100 hPa |
Pressure (operating) | < 1500 hPa |
Humidity | 0 … 100 %, non-condensing |
Condensation prevention | Sensor head heating when power on |
Chemical tolerance | DMSO, IPA (70 %), H2O2 (2000 ppm, non-condensing), ethanol, acetic acid |
Electromagnetic compatibility | EN61326-1, Generic Environment |
Property | Description/Value |
---|---|
Digital outputs | I2C 5 V, RS-485 (2-wire with Vaisala Industrial Protocol) |
Analog output |
0 … 20 mA (scalable) max. load 600 Ω |
Power consumption | < 1 W (pulsed) |
Operating voltage |
11 … 30 VDC 20 ... 30 VDC (with analog output) |
Property | Description/Value |
---|---|
Connector | M12/8 pin |
Weight |
150 g (5.29 oz) without cable 200 g (7.05 oz) with cable |
IP rating |
IP54 (sensor head) IP20 (electronics housing) |
Materials | |
Housing | Metal coated plastic ABS+PC |
Inner tube | Aluminum |
Probe tube | PPSU |
Filter | PTFE |
Dimensions | |
Probe tube max. diameter | 30.2 mm (1.19 in) |
Probe tube min. diameter | 24.8 mm (0.98 in) |
Probe tube length | 118.5 mm (4.67 in) |
Sensor filter diameter | 19 mm (0.75 in) |
Sensor filter length | 12 mm (0.47 in) |