- 1
- Electronics housing. Contains the main component board, including the digital pressure sensor.
- 2
- Holes for M4 screws on both sides of the housing. Maximum screw depth 8 mm. Two screws included, type BN 10649 M4.
- 3
- Type label on housing cover (not shown).
- 4
- 8-pin M12 connector.
- 5
- Probe body.
- 6
- Measurement cuvette with optics and CARBOCAP® CO2 sensor.
- 7
- PTFE filter.
- 8
- Silicone plug for sealing the lead-through. Recommended accessory, suitable for ∅ 44 mm lead-throughs.
| CAUTION Do not open the electronics housing; there are no user serviceable parts inside. All wiring is done through the M12 connector (4). |