Attaching OIF411 to EN-SCI Ozone Sensor Frame - RS41-D - RS41-SG - RS41-SGM - RS41-SGP

RS41 Ozone Soundings User Guide
Document code
M211486EN
Revision
E
Language
English
Product
RS41-D
RS41-SG
RS41-SGM
RS41-SGP
Document type
User guide
In addition to OIF411 and the ozone sensor frame, you need the following equipment:
  • Two M3 nuts included in RSA411 Ozone Interface Kit
  • Drill with applicable drill bits
  • Socket wrench for M3 nuts
  • Screwdriver
CAUTION Keep the sensor in an upright position. The sensor contains liquid.
Figure 1 shows EN-SCI Model Z ozone sensor frame.
Figure 1. EN-SCI Model Z Sensor
To connect the ozone sensor frame and Ozone Interface Board OIF411:
  1. Remove the wing nuts attached to OIF411.

  2. Use a drill to make the holes in the ozone sensor frame bigger.

    Figure 2. Drilling the Ozone Sensor Frame Holes