HMW90 Series User Guide - HMW90

Product status
Document code: M211399EN-J
Language: English
Product: HMW90
Document type: User guide

About this document
Version information
Related manuals
Documentation conventions
Trademarks
Product overview
Introduction to HMW90 series
HMW90 series transmitters
Output parameters
Product and part names
Opening the transmitter
Decorative cover option
Safety
ESD protection
Installation
Configuration before installation
Configuration of analog output models
DIP switches of analog output models
Relay configuration in DIP mode
Changing between DIP and custom configuration
Configuration of digital output models
DIP switches of digital output models
Addressing with Modbus protocol
Selecting location
Installing the mounting base
Wiring
Wiring HMW92
Wiring HMW93
Wiring TMW92
Wiring TMW93
Wiring HMW95
Connecting several transmitters on same RS-485 line (HMW95)
Connecting a common AC power supply to several transmitters
Operation
Display
Startup screens
Measurement screen
Symbols on the display
Service port
Connecting with Indigo80 indicator
Connecting with Insight PC software
Connecting with computer using terminal application
Terminal application settings
Installing the driver for the USB service cable
List of serial commands
Transmitter information
Show transmitter information
Show transmitter firmware version
Show transmitter serial number
Show transmitter status
Show measured parameters
Show command help
Show command list
Measurement settings
Set environmental parameters
Select units
Analog output settings
Set analog output mode
Set analog output scaling
Set output clipping and error limit
Display settings
Select parameters to display
Serial line output commands
Start measurement output
Stop measurement output
Output a reading once
Set output interval
Set output format
Serial line settings
Set remote echo
Set serial line turnaround delay
Relay configuration in custom mode
Set relay mode
Set relay parameter and limits
Relay configuration examples
Calibration and adjustment commands
Adjust humidity measurement
Show current RH adjustment
1-point adjustment of RH measurement
2-point adjustment of RH measurement
Clear user adjustment of RH measurement
Adjust temperature measurement
Show current T adjustment
1-point adjustment of T measurement
Clear user adjustment of T measurement
Enter calibration and adjustment information
Testing commands
Test analog outputs
Test relay operation
Other commands
Enable advanced serial commands
Reset transmitter
Calibration and adjustment
Adjustment using display and trimmers
Calibration and adjustment with Indigo80 handheld indicator
Performing guided calibration with Indigo80 handheld indicator
Performing manual adjustment with Indigo80 handheld indicator using previously measured values
Adjustment using Insight PC software
Adjustment using HM70
Adjustment using a computer with a terminal application
Maintenance
Periodic maintenance
Cleaning
Repair maintenance
Replacing the measurement module
Troubleshooting
Problem situations
Error messages
Viewing error messages on serial line
View currently active errors
View error table
Error state
Reverting to factory settings
Reverting to factory settings using DIP switches
Reverting to factory settings using service port
Technical data
Specifications
Spare parts and accessories
Dimensions and models
Vaisala services
Service centers
Technical support
Warranty
Modbus reference
Warranty
Maintenance and calibration services
Technical support
Recycling

Back to home page