Removing and fastening fixed probe - HMT130

HMT130 User Guide
Document code
M211280EN
Revision
D
Language
English (United States)
Product
HMT130
Document type
User guide
To remove or replace the probe:
  1. Loosen the metal locking bushing by carefully turning it counterclockwise.
  2. Remove the probe from the transmitter by pulling it gently downwards.
  3. Attach the new probe to the 4-pin M8 panel connector at the transmitter (only one position possible).
  4. Tighten the locking bushing to the M8 panel connector by turning it clockwise
    Figure 1. Removing the probe (fixed probe model)
    1
    Locking bushing
    2
    Holder bushing (attached permanently to the probe)
    3
    Probe