BL-View is connected to a ceilometer through a serial line, TCP/IP, or UDP connection.
When the BL-View installation is complete, the software starts to receive and analyze data continuously even when the graphical user interface is not open.
Before using BL-View to view and analyze live data from the ceilometer:
-
Make sure that the ceilometer is connected to a computer.
For more information, see Vaisala Ceilometer CL31 User Guide and Vaisala Ceilometer CL51 User Guide.
-
Check that the ceilometer settings are correctly configured.
-
-
If the previous BL-View version was 2.x, follow these instructions: Upgrading BL-View from Version 2.x to Newer Version
-
If you are a new user or the previous BL-View version was earlier than 2.0, follow these instructions:
-
Add the location parameters of the ceilometer to BL-View.
-
Configure the BL-View connection settings.
-
Configure the message settings.
-
-
When you have completed adding the ceilometers and configured the connection settings and message settings, restart the computer. |