You can create calculation presets to use in
plots.
| Saving a new or an edited preset closes
all open plots except the live default plot and resets the view. |
-
In BL-View, select .
-
To create a new preset, select Create new, type a name, and select OK.
In the Settings window, set the following:
- Algorithm method
- Select Merged
Gradient and profile fit, Gradient, or Profile fit.
- Advanced algorithm settings
- For information about modifying advanced algorithm settings, see
Modifying Algorithm Settings of Calculation Presets.
- Boundary layer min
- Set the lowest reported boundary layer height. The available range is
30 … 500 m (99 … 1640 ft). The default value is 30 m (99 ft).
- Boundary layer max
- Set the highest reported boundary layer height. The available range is
200 … 4000 m (656 ... 13 120 ft). The default value is 4000 m (13 120 ft).
- Number of boundary layers
- Set the maximum number of boundary layers shown in BL-View. The
available range is 1 … 3. The default value is 3.
- Time averaging
- Select defined by User and set the time averaging interval. The default value is 30 minutes.
- Height averaging
- Select defined by User and set the height averaging interval. The default value is 360 m (1181 ft).
-
Select Save and Close.
To use the new preset, select Add Plot and for Preset select the preset you created.