- Enter Maintenance mode.
- On the Advanced settings page, press Data settings.
-
On the Data settings page, select how to display the data values on the ATC page.
- Normal
- The ATC page displays all the data values. This is the default setting.
- WD50 2‑min ICAO
- The ATC page presentation is similar to WIND50 display 2‑minute page with ICAO mode ON.
-
- The 10‑minute wind direction variation is displayed only when the direction is ≥ 60°.
- The 10‑minute wind speed extremes are displayed only when the difference between the 10‑minute minimum or maximum wind speed and the 2‑minute average wind speed ≥ 5 m/s (10 kt/18 km/h).
-
To save the changes, press Apply.
The changes are valid only after pressing Apply.