Install the optional bird cage on top of the wind sensor.
|CAUTION Make sure that you do not damage the WMT700 array when installing the bird cage.|
| In cold climates, take into account that accumulated snow or ice on the bird cage can disturb the measurement. In such conditions, visit the site frequently to clear ice and snow build‑up.|
- Bird cage
- Bird cage straps
- Wind sensor
- Guide for attaching the straps
- Latch for attaching the straps
Unpack the bird cage and the straps.
Position the bird cage on top of the wind sensor and press the kit down until the three hooks are in contact with the transducer arms.
Run the lower strap through the 3 guides in the kit.
Lift the latch screw, insert the strap to the latch, and press down the latch screw.
To tighten the screw, turn it clockwise with a screw driver or a socket. Do not over-tighten.
Run the upper strap through the three guides in the kit, and repeat 4 and 5 for it.