Standard cables - WMT700

WMT700 Series User Guide
Document code
M211095EN
Revision
K
Language
English
Product
WMT700
Document type
User guide
The standard cables are for non-heated, transducer-heated, and transducer-and-arms-heated WMT700.
The following standard cables are available:
  • Cable 2 m (227567SP)
  • Cable 10 m (227568SP)
  • Cable 15 m (237890SP)
  • Cable 26 m (237889SP)
Table 1. Standard cables
Order code Description Purpose
227567SP Standard cable 2 m, cable connector, open leads on one end Used for analog output or serial communication with 2 serial ports.
227568SP Standard cable 10 m, cable connector, open leads on one end
237890SP Standard cable 15 m, cable connector, open leads on one end
237889SP Cable 26 m, cable connector, open leads on one end
228259SP RS-485 cable 2 m, cable connector, open leads on one end Used for serial communication with RS-485 interface.
228260SP RS-485 cable 10 m, cable connector, open leads on one end
ASM210719SP Junction box with cable 2 m Used when a cable longer than 10 meters is needed. Junction box contains terminal blocks that extend the 2-meter cable to a needed length.
If there are unused wires, make sure that they are unconnected and protected. Do not cut off any wires.