Default settings for different communication profiles - WMT700

Table 1. Default settings for different digital communication profiles

Setting	Parameter	WMT700	WS425 ASCII	WS425 NMEA Ext	WS425 SDI-12	WS425 F/G ASOS	ROSA MES12
Service port
Protocol	com1_protocol	WMT700
Baud rate	com1_baud	9600	9600	9600	9600	9600	9600
Data bits	com1_data	8	8	8	8	8	8
Parity	com1_parity	0 (None)	0 (None)	0 (None)	0 (None)	0 (None)	0 (None)
Stop bits	com1_stop	1	1	1	1	1	1
Response Delay	com1_delay	20 ms	20 ms	20 ms	20 ms	20 ms	20 ms
Data port
Protocol	com2_protocol	WMT700	WS425 ASCII	WS452 NMEA Ext	SDI-12	WS425 F/G ASOS	ROSA MES12
Baud rate	com2_baud	9600	2400	9600	1200	2400	9600
Data bits	com2_data	8	8	8	7	8	8
Parity	com2_parity	0 (None)	0 (None)	0 (None)	1 (Even)	0 (None)	0 (None)
Stop bits	com2_stop	1	1	1	1	1	1
Response Delay	com2_delay	20 ms	20 ms	20 ms	N/A	20 ms	20 ms
Other parameters
Address	address	A	A	A	0	1	12
Auto-matic message number	autoSend	Disabled (0)	Disabled	15	Disabled	Disabled	Disabled
Auto-matic message port	autoPort	COM1	COM1	COM2	COM1	COM1	COM1
Auto-matic data message interval	autoInt	1 s	1 s	1 s	1 s	1 s	1 s
Wind averaging time	wndAvg	1 s	1 s	3 s	1 s	5 s	600 s
Gust averaging time	wndGustTime	3 s	3 s	3 s	3 s	3 s	3 s
Installa-tion orienta-tion of WMT700	wndOrientation	Array facing up
Wind measure-ment averaging method	wndVector	Scalar averaging

The parameters in the following table do not have a protocol-specific default value. They are defined in the configuration code.

Table 2. Parameters with no protocol-specific default value

Setting	Parameter	WMT700	WS425 ASCII	WS425 NMEA Ext	WS425 SDI-12	WS425 F/G ASOS	ROSA MES12
Interface type	com2Interf	N/A	N/A	N/A	N/A	N/A	N/A
Wind speed unit	wndUnit	N/A	N/A	N/A	N/A	N/A	N/A