When WMT700 is installed and configured, you can start operating the wind sensor:
- To receive wind measurement data through a
serial connection as data messages, use serial communication.
- If you use the WMT700 profile, see the following operating instructions.
- If you use WS425 or SDI-12 profiles, see Operating WMT700 with WS425 and SDI-12 profiles
- To receive wind measurement data as current, potentiometer, voltage, or frequency output, use analog output.
| For a complete list of the serial commands available for the WMT700 series wind sensors, see WMT700 commands. |