Mounting WMT700 marine adapter - WMT700

WMT700 Series User Guide
Document code
M211095EN
Revision
K
Language
English
Product
WMT700
Document type
User guide
  • Allen key 4.0 x 200 mm with T-handle
  • Screws (3 pcs)
If there is a connector cover in your WMT700, remove it before installing the marine adapter (WMT700FIX60-MARINE).
  1. Connect the WMT700 cable firmly to WMT700.
    CAUTION Make sure that you tighten the connector properly to avoid water leakage and damage to the sensor. Failure to tighten the connector properly voids the warranty.
  2. Lead the WMT700 cable through the marine adapter (WMT700FIX60-MARINE).
    1
    WMT700
    2
    Screws (3 pcs)
    3
    Marine adapter (WMT700FIX60-MARINE)
    4
    Allen key 4.0 x 200 mm with T-handle
  3. Attach the mounting adapter with the 3 screws provided with the marine adapter. Tighten the screws with the Allen key.
CAUTION Do not try to remove the plastic part of the marine adapter or open the screws.