STATUS [notification] [level]<cr>
- notification
- If specified, enables or disables the analog output error notification. Allowed values ON and OFF.
- level
- Error notification level. Allowed values are 0 … 30.
The STATUS command shows the following information:
- Current analog output state (ON for normal, ERROR if an error is active)
- Status of analog channel error notification (ON for enabled, OFF for disabled). See Analog Output Error Notification.
- Scaling of the selected output quantity (low and high values)
- Error notification level for the current analog output mode
Example (analog output in error state, output quantity RH, analog output mode 0 ...
10V):
>status
Channel 0:
Status : ERROR
Notification : ON
Level Lo : 0
Level Hi : 100
Error level : 0.000000