Installing FSP102 power board - LT31 - FSP102UGK

FSP102UGK Installation Manual
Product status
Document code
M210953EN
Revision
C
ft:locale
en-US
Product
LT31
FSP102UGK
Document type
User guide
  • Flat head screwdriver (size 0.5 x 3.0)
  • Wrench (size 5.5)
  • Allen key (size 2.5)
  1. Set the FSP102 input voltage selection switch according to the AC (mains) voltage provided to LT31 at the installation site.
    CAUTION Make sure that the FSP102 input voltage setting is in accordance with your AC (mains) power. Wrong voltage can damage the product.
  2. Attach the FSP102 board to the spacers on the mounting plate.

    Use an Allen key or a flat head screwdriver. Install the 4 spacers and tighten firmly with a wrench.

  3. Connect the transformer wires to FSP102.
    FSP102 transformer wiring
    Color Marking FSP102 terminal
    Brown None 19
    Black None 18
    Brown 1 17
    Black 1 16
    Yellow None 15
    Red None 14
    Blue None 13
    Green None 12
  4. Attach the power supply connectors to the FSP102 board.
  5. Reinstall the plastic protection cover plate with the original screws.
  6. Attach the new F3/F4 fuse sticker so that it covers the old sticker.
    The new sticker shows 5 AT for F4.