Mounting WSP152 with Mounting Screws - WSP152

WSP152 Quick Guide
Document code
M210926EN
Revision
C
Language
English
Product
WSP152
Document type
User guide
Mount WSP152 on a wall or a table edge with mounting screws.
  1. Open the 4 plastic screws and remove the enclosure cover.
  2. Insert the mounting screws (not included) in the holes behind the two lowermost plastic screws, and secure the unit to the desired mounting point.

    Select the screws according to the material of the mounting surface. The WSP152 rear plate has threaded M4 holes. Use either smaller screws or enter the screws from the rear using the M4 threads instead of nuts.

  3. Reattach the enclosure cover with the 4 plastic screws.
  4. Lead the optional heating power cable through the HTG cable gland and connect the wires to host terminals 1 and 2. See Wiring WSP152. Tighten the cable gland.
  5. Connect the USB cable to the male connector on the right and the line cable to the female connector on the left.
  6. Connect the grounding cable with the provided crimp connector and an M5 nut to the grounding screw on the rear upper left corner of WSP152.

    The best grounding point is in the PE (Protective Earth) terminal of the same plug or outlet where the PC line cord is connected to.