Mounting WSP152 on Pole Mast - WSP152

WSP152 Quick Guide
Document code
M210926EN
Revision
C
Language
English
Product
WSP152
Document type
User guide
CAUTION Do not place WSP152 further than 1.4 m (5.6 ft) from the PC. Do not extend the cable.
  1. Disconnect all live voltages.
  2. Attach the unit to the mast close to the protected device with the adjustable mounting clamp. Set the steel strip beneath the latch at the back of the enclosure
  3. Fix the steel strip around the pole mast. You can shorten the strip to a suitable length.
  4. Attach the strip ends to the fastener and secure the unit to the mast by tightening the fastener screw.
  5. Lead the optional heating power cable through the HTG cable gland and connect the wires to host terminals 1 and 2. See the wiring layout. Tighten the cable gland.
  6. Connect the USB cable to the male connector on the right and the line cable to the female connector on the left.
  7. Connect a grounding cable with the provided crimp connector and M5 nut to the grounding screw on the rear upper left corner of WSP152. The best grounding point is in the PE terminal of the same plug or the outlet the PC line cord is connected to.