Use the PRES command to set ambient pressure value for fixed pressure compensation.
If the value is changed frequently, use the XPRES serial line command. Its value is cleared to 0.0 at reset; if it is set to other than 0, it overrides the setting given with the PRES command.
In normal pressure conditions, the PRES command is not needed. If mixing ratio is used in high altitudes, pressure changes increase the mixing ratio. |
Use the serial line and do the following:
PRES a.aaaa
XPRES a.aaaa
Parameter | Description |
---|---|
a.aaaa | Ambient pressure value (bar) |
Example
>pres
Pressure : 1.013 bar ?
>
Example
>xpres
Pressure: 0.000 bar?
>